{$cfg_webname}
主页 > 机械机电 > 过程控制 >

3500立方米拱顶储油罐设计(含CAD零件装配图)

来源:56doc.com  资料编号:5D13749 资料等级:★★★★★ %E8%B5%84%E6%96%99%E7%BC%96%E5%8F%B7%EF%BC%9A5D13749
资料以网页介绍的为准,下载后不会有水印.资料仅供学习参考之用. 帮助
资料介绍

3500立方米拱顶储油罐设计(含CAD零件装配图)(设计说明书16800字,CAD图纸4张)
摘要
本设计的题目是3500立方米拱顶贮罐设计。贮罐主要应用于石油化工工业贮存石油及其产品以及其他液体化学产品。本设计设计的贮罐存储的液体为汽油。
      本文的目的是对储油罐依据我国国情的发展趋势进行分析,进而由我国储罐发展趋势对3500m³拱顶储油罐设计。使以后我国使用的3500m³拱顶储油罐的设计方案更符合我国国情,改良后的3500m³储油罐有节约空间、建设时间短、施工简单和后期维修方便等优点让设计思路更符合我国的储油罐设计。
 本设计的设计任务是:通过于查阅工具书及相关参考资料,了解贮罐,罐壁,罐顶,罐底和其他附件等各部件的结构和功能,并分析它们在各种载荷下的受力及各种应变,通过分步完成各部件的选材,设计计算和各种应力校核,最终完成一个公称容积为3500立方米的拱顶贮罐的设计,指明贮罐在工业应用中的注意事项并制定各种安全防护措旅来保证贮罐的安全使用。本设计的主要特点是:本贮罐的罐顶形式采用目前:最为普遍的拱顶,容积为3500立方米。
      本设计设计过程包括:1.贮罐经济尺寸的选择;2.罐壁的设计;包括罐壁强度计算,贮罐风力稳定计算,贮罐的抗震设计,罐壁的结构设计和防腐蚀结构设计等。3.贮罐罐底的设计;4.贮罐罐顶的设计;5.贮罐附件的设计及选用;6.贮罐在工业应用中的安全及消防设施的设计选用等内容。
     本设计共完成A1号图纸四张。包括3500立方米拱顶贮罐装配图一张,贮罐罐体图一张,贮罐罐壁图一张,贮罐罐底图一张。它们分别描绘了3500立方米贮液罐各个主要部件的组成与结构特点。
文字资料完成设计计算书一份,设计说明书一份,设计中所查参考的参考文献记载一份。

关键词:   油品贮罐;   强度计算;  盘梯;  罐顶

Abstract
The  topic  of  this  design  is  3500  cubic  meters  of  vault  storage tank  design.  Oil  storage  tank  is  mainly  used  in  petroleum  and chemical  ind-ustry  and  its  products,  and  other  liquid  chemical products.  The  design  of  the  storage  tank  to  store  liquid  to  gas.
The  purpose  of  this  article  is  to  storage  tanks  according  to  the analysis  of  the  development  trend  of  China's  national  conditions, and  then  by  our  country  development  trend  of  tank  design  of  3500  m  after  vault  storage  tanks.  Make  use  of  3500 m  after  vault storage  tanks  in  China  after  design  more  accord  with  China's  national  conditions,  mo-dified  3500 m  after oil  tank  has  a  space saving,  short  construction  time,  construction  is  simple  and convenient  maintenance  for  late  design  more  in  line  with  the  oil tank  design  of  our  country.
 Design  task  of  this  design  is : through  the  consult  reference  books and  related  resources,  understand  the  storage  tank,  the  tank  wall, roof,  the  tank  bottom  and  othe  raccessories  and  so  on  various  parts  of  the  structure  and  function,  and  analyze  them  in  a  variety of  stress  and  st-rain  under  the  load,  through  step  by  step  to complete  the  select  mater-ial  of  each  parts  design  calculation  and various  stress  checking,  finally  completed  a  nominal  capacity  of 3500  cubic  meters  of  the  design  of  t-he  vault  storage  tank,  storage tank  in  the  matters  of  attention in  the  industrial  applications  are pointed   out  and  formulate  various  safety  pr-otection  measures  used  to  ensure  the  safety  of   the  tank. The  design  of   the   main features   are:  the  form  of  storage  tank  roof  adopts  at  present: the  mos  t common   vault,   the   volume  of   3500  cubic meters.
This  design  including   design  process: 1. The   tank   size   economic   choice; 2. The  design of  the tank  wall; Wind stability  calculation  incl-uding   tank  wall  strength  calculation, storage  tank,  storage   tank  of   the   seismic  design,  the  structure of  tank wall design,  design  of   anticorrosive   structure  and   so  on. 3.   The  design   of  the  storage  tank bottom;  4.  The design  of tank  roof;  5. The  design  of  tank  accessories  and  selection; 6. Storage  tank  in  the  design  of  the  industrial  application  of  the security  and  fire  control  facilities  selection ,   etc.
This  design  completed  A 1  drawing  number  four.  Including  3500 cubic  meters  a  vault  storage  tank  assembly  drawing,  figure  a storage  tank,  storage tank  wall  map,  a storage  tank  a  reproduction. Respectively  depicts  3500  cubic  meters  of  water  storage  tank  is  the  main  part of  composition  and  structural characteristics. A written   materials to  complete   the  literature   review,   a  design calculation  , a  design  specification,  ch-eck   the   reference  in  the design   of  a  reference   document.

 Key words:    oil tank;      Strength  calculation;     winder;      dome  tank
 

3500立方米拱顶储油罐设计(含CAD零件装配图)
3500立方米拱顶储油罐设计(含CAD零件装配图)
3500立方米拱顶储油罐设计(含CAD零件装配图)
3500立方米拱顶储油罐设计(含CAD零件装配图)


目    录
  第一章储罐设计计算      1
  1.1  储罐经济尺寸的选择      1
     1.1.1 储罐经济尺寸的计算      1
     1.1.2 载荷的计算      2
  1.2 罐壁设计      3
     1.2.1 罐壁的强度计算       3
     1.2.2 罐壁下节点边缘应力的校核      4
  1.3 储罐的风力计算      8
     1.3.1 抗风圈计算      8
     1.3.2 加强圈计算      8
  1.4 储罐的抗震设计      9
  1.5罐壁结构设计     11
     1.5.1 截面与联接形式设计     11
     1.5.2 圈板宽度计算     11
     1.5.3 包边角钢设计     11
     1.5.4 罐壁开孔补强计算     11
     1.5.5 储罐进出口管结构设计     12
     1.5.6 其他结构设计     12
  1.6 防腐蚀结构设计     13
  1.7 罐底设计     13
     1.7.1 罐底的应力计算     13
     1.7.2 罐底结构设计     14
  1.8 罐顶设计(拱顶罐)     15
     1.8.1 结构     16
     1.8.2 顶板厚度的选取     17
     1.8.3 拱顶球壳的稳定验算     18
  1.9盘梯与平台设计     20
     1.9.1 盘梯与平台的计算     20
     1.9.2 选型原则     22
     1.9.3 注意事项     22
  1.10 储罐附件设计与选用     23
     1.10.1 概述     23
     1.10.2 常用附件     23
  1.11 安全及消防设计     25
     1.11.1 概述     25
     1.11.2消防设施     25
     1.11.3其他安全设施     26
  第二章设计说明书     28
  2.1 储罐的制造     28
     2.1.1 底板的制造、组装与焊接     28
     2.1.2 壁板的制造与组装焊接     29
     2.1.3 固定顶储罐顶板制造与组装焊接     30
     2.1.4 注意事项     31
  2.2 储罐的安装施工     31
  2.3 储罐的验收     32
     2.3.1 储罐几何尺寸公差     32
     2.3.2 焊接的检验     32
     2.3.3 焊缝返修     33
     2.3.4 罐底严密性试验     34
     2.3.5 罐壁、罐顶的严密性和强度试验     34
  2.4 防腐蚀     34
  2.5 储罐的使用注意事项     34
  参考文献     36
  致谢     37

推荐资料